Legacy U.S.A. (E)
5
Audio
5-13
– CONTINUED –
control knob again to cancel the SCAN mode and to stop on any dis-
played frequency.
J
Selecting preset stations
Presetting a station with a preset button allows you to select that station
in a single operation. Up to six AM and FM stations each may be preset.
J
How to preset stations
1. Press the FM/AM selection switch to select either FM or AM reception.
2. Press the volume control knob or tune the radio manually until the de-
sired station frequency is displayed.
3. Press one of the preset buttons for at least two seconds to store the
frequency. The frequency of the station will flash once on the display at
this time. If the button is pressed for less than two seconds, the preced-
ing selection will remain in memory.
When the volume control knob is pressed for automatic tuning, stations
are scanned in the direction of low frequencies to high frequencies only.
Automatic tuning may not function properly if the station reception is
weakened by distance from the station or proximity to tall buildings and
hills.
NOTE
If the connection between the radio and battery is broken for any reason
such as vehicle maintenance or radio removal, all stations stored in the
preset buttons are cleared. If this occurs, it is necessary to reset the pre-
set buttons.
