subzero.com | 5
Specifications
DUAL INSTALLATION
If two units are installed side by side, a dual installation kit
may be required. Installations without a custom filler strip
require a dual installation kit. If a dual installation kit is not
specified, a 2"
(51)
filler strip is recommended between the
units. Dual installations without a filler strip can only be
accomplished using two units with opposite hinges. Refer
to the illustrations below.
IMPORTANT NOTE:
For dual installations of a door and
drawer model, the door model face frame is approximately
1/16"
(2)
proud of the drawer face frame. This is only appar-
ent when the door/drawers are open at the same time.
The door/drawers align when closed. The door handle
must be next to the drawers.
Dual installation kits are available through an authorized
Sub-Zero dealer. For local dealer information, visit the
find a showroom section of our website, subzero.com.
For questions regarding the installation, call Sub-Zero
Customer Care at 800-222-7820.
DUAL OPENING WIDTH
W
Two 24" Models
48"
(1219)
Dual installation kit required.
Opening Dimensions
DESIGNER SERIES UNDERCOUNTER MODELS
24"
(610)
OPENING WIDTH
34
1
/
2
"
(876)
OPENING
HEIGHT
TOP VIEW
SIDE VIEW
FRONT VIEW
NOTE: 3
1
/
2
"
(89)
finished returns will be visible and should be finished to match cabinetry.
3
/
4
"
(19)
TYPICAL
FRAMED
CABINETRY
24"
(610)
FILLER
3
1
/
2
"
(89)
FINISHED
RETURN
FRAMELESS
CABINETRY
24"
(610)
3
/
4
"
(19)
TYPICAL
3
1
/
2
"
(89)
FINISHED
RETURN
24"
(610)
OPENING
DEPTH
WITHOUT FILLER STRIP
FILLER STRIP
Opposite hinges
Same side hinges
The depth of each model is 23 1/8"
(587)
. Allow for panel
thickness when planning the finished opening depth. A
minimum 3 1/2"
(89)
finished return is required on all sides of
the opening. Framed cabinets require additional finished
filler material behind the face frame for a proper installa-
tion. Refer to the illustration above.
