Planning Information
Undercounter Model 245
Dimensions in parentheses are in
millimeters unless otherwise specified.
5
F R A M E D P A N E L S
Framed door panels must be
1
/
4
" (6) thick around the
perimeter. If the panel is thicker than
1
/
4
" (6), an edge must
be routed around the panel to ensure a proper fit. The
edge must be
1
/
4
" (6) thick and you must allow
3
/
8
" (10)
around the perimeter for the frame. Model 245 requires no
handle recess. Refer to the illustrations on this page.
IMPORTANT NOTE:
The Model 245 lower hinge extends
out from the side of the unit in the area of the kickplate.
When the unit is installed tightly against a full-depth panel
or cabinet, there can be interference. Refer to the full-scale
illustration on pge 6.
The overlay door panel design application is not available
for the Model 245.
IMPORTANT NOTE:
The weight of the panel cannot
exceed 20 lbs (9 kg).
F R A M E D P A N E L D I M E N S I O N S
Door Panel Width
23
1
/
2
" (597)
Door Panel Height
28
1
/
8
" (714)
Maximum Panel Weight
20 lbs (9 kg)
W
H
Framed Door Panel
Framed door panel
1
/
4
" (6) thick or less
Framed door panel thicker than
1
/
4
" (6)
PANELS
1
/
4
"
(6) THICK OR LESS
1
/
4
"
(6)
Panel
Trim reveal
1
/
4
"
(6)
min
PANELS THICKER THAN
1
/
4
"
(6)
Trim reveal
1
/
4
"
(6)
min
Rout to
1
/
4
"
(6)
thickness
