4
Safety Information (continued)
NOTE:
To avoid injury from unexpected starting or electrical
shock, do not plug the power cord into a source of power during
unpacking and assembly. The cord must remain unplugged
whenever you are adjusting/assembling the fireplace.
If any part is missing or damaged, do not attempt to use or
plug in the power cord until the missing or damaged part is
correctly replaced. To avoid electric shock, use only identical
replacement parts when servicing double-insulated tools.
NOTE:
This unit is not intended for use with CRT TVs. Use
only with flat-panel TVs and audio/video equipment meeting
recommended size and weight limits. Never use with larger/
heavier than recommended flat-panel TVs or equipment.The
base of the television must be able to rest on the supporting
surface of the unit without overhanging the edges. Improperly
positioned flat-panel TVs, or flat-panel TVs and other equipment
that exceed recommended size and weight limits could fall off
or break the unit, causing possible serious injury. For use with
televisions weighing 70 lb (31.8 kg) or less. Using with heavier
televisions may result in instability causing tip over resulting in
death or serious injury.
NOTE:
SAVE THESE
INSTRUCTIONS
NOTE:
Use care in assembling your new fireplace. Take your
time and use the hardware provided and a quality Phillips head
screwdriver. Never overtighten bolts.
Do not sit on any part of the mantel.
It is recommended to work on a soft surface like a rug or to
lay out a blanket to protect the furniture from getting scratched
during the assembly process.
