7
10
1
3
2
6
5
4
7
8
stûv microMega – installation of ready-to-fit cladding - 0512
installation
removal of the door
The ready-to-fit Stûv cladding is
attached to the micromega without
the door.
Therefore the first step is to remove
the door.
- Ensure the glass door is fully pulled
down.
- Tilt the door.
- Unfasten the counterbalances and
position them so that they rest against
the bottom of the frame.
Once the door is open, it is
recommended to block it in this
position. To do this, screw 2 M6
screws to the base of the lower hinge
part [diagram 5].
