lithium pack
rcB 1200 / rcB 1800
Manual Master Englisch A17
Project No.:
1508
page 8 / 11
issued: 30.04.2014
Distribute to:
SturiaTronic, meinrad.cc, cunabo, Lenz, Supplier, SGS
updated: 18.08.2022
arranged:
P.Greisdorfer, Ph. Maier, G.Kremer
File Name:
lithium pack rcB 1200 rcB 1800 Manual Master Draft for FCC ENG A17.docx
IMPORTANT INSTRUCTIONS FOR USE
•
When using the heated product, the optimal heating power is only produced when all heated products,
textiles and socks you are wearing are dry.
•
Do not operate the device at the highest heating power for longer than several minutes.
•
Always set the product to a low or medium heat output to maintain a comfortably warm temperature
(the heater should be virtually unnoticeable).
FUNCTION DESCRIPTION
lithium pack rcB 1200 / lithium pack rcB 1800
Manual operation:
The lithium packs have 3 heating levels which are indicated by the heat setting display (Fig. 1.2) on the
lithium packs themselves.
Remote control:
When using remote control via the APP, the heat output can be set to one of 9 levels via the corresponding
controls in the APP.
USE AND FUNCTION
Turning on:
Turn on the product to the lowest heat setting by briefly pushing the control button (approximately 0.5
seconds) on the lithium pack (Fig. 1.3).
Setting the heat output:
This can be
done by repeatedly pressing the function button
on the lithium pack (Fig. 1.3), or using the
corresponding control in the APP when using remote control.
The respective heat level is indicated by the illumination of the heat setting display (Fig. 1.2) on the lithium
pack
, or in the APP when using remote control.
Turning off:
Pressing the function button repeatedly turns the lithium pack off.
Note:
When using remote control, the APP must be closed to be able to turn off the lithium pack.
The lithium pack can still be turned on for 24 hours via the APP, but after that, only by pressing the button.
LED, steady on
–
low heating power
LEDs, steady on
–
medium heating power
LEDs, steady on
–
high heating power
OFF