background image

CONGRATULATIONS on your
selection of Tennsco’s STUR-D-STOR
home shelving system. The
STUR-D-STOR system is designed for
use in the home, the office, and the
industrial workplace. STUR-D-STOR
shelving systems provide sturdy
shelving which may be used as either a
single upright unit or split in half to
provide shelving with a handy work
surface. Our unique shelf support
design provides support for loads of up
to 850 pounds per shelf!

ASSEMBLY INSTRUCTIONS & PARTS MANUAL #1090703

HOME SHELVING SYSTEM,
Model No. LSS-482484

STUR-D-STOR, Dickson, TN 37056-1888  *  (615) 446-8000

Be Sure To Save This Instruction Sheet For Future Reference!

GENERAL SAFETY INFORMATION

Some parts may have sharp edges. CARE must be taken when
handling various pieces to avoid injury. For safety, wear a pair of
work gloves when assembling or performing any maintenance on
shelving unit. Shelving unit is designed to be placed upright on a flat
surface. Distribute the weight of items stored on the shelves evenly
across the shelves. Do not place heavier items on the upper shelves.
If the shelving unit is to be located in an uneven manner or positioned
on an unlevel surface, the unit should be secured to a wall or floor
with appropriate fasteners. Do not use as a ladder!

LIMITED WARRANTY

Tennsco warrants goods purchased hereunder to be free of defects
in materials and workmanship for a period of one (1) year from the
date of shipment, hereunder. This warranty shall not apply in the
event goods are damaged as a result of misuse, abuse, neglect,
accident, improper application, modification or repair by persons not
authorized by Seller, where goods are damaged during shipment, or
where the date stamps on the goods have been defaced, modified or
removed. UNLESS CONSIDERED UNENFORCEABLE OR
UNLAWFUL UNDER APPLICABLE LAW:

a.  ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO

WARRANTIES OR MERCHANT ABILITY AND FITNESS FOR A

PARTICULAR PURPOSE ARE HEREBY EXCLUDED.

b. BUYERS REMEDY, IF ANY, FOR ANY DEFECTIVE GOODS

S H A L L   B E  L I M I TE D   T O   A   R EF U N D   B Y  SE L L ER   O R

REPLACEMENT OF THE GOODS AT SELLER’S OPTION, AND

SHALL IN NO EVENT INCLUDE DAMAGES OF ANY KIND,
WHETHER INCIDENTAL, CONSEQUENTIAL OR OTHERWISE.

N O GOOD S AC CEPTED FO R RETU RN  WITHOUT PRIOR

APPROVAL. Seller shall have the right to inspect any goods claimed

to be defective at Buyers place of business or require Buyer to return

the goods to Seller for inspection on Seller’s premises. Transportation
charges covering returned goods will be borne by Seller only if such

goods are proven to be defective, are covered by this warranty and are

returned within the warranty period stated above.

Summary of Contents for LSS-482484

Page 1: ...riate fasteners Do not use as a ladder LIMITED WARRANTY Tennsco warrants goods purchased hereunder to be free of defects in materials and workmanship for a period of one 1 year from the date of shipment hereunder This warranty shall not apply in the event goods are damaged as a result of misuse abuse neglect accident improper application modification or repair by persons not authorized by Seller w...

Page 2: ... that the flat edge of the shelf support is facing up as shown in exploded view below 4 Repeat steps 2 and 3 to prepare a second set of uprights as shown You should now have two upright end assemblies A B A 5 Place the two end assemblies about 36 apart with the angled corners facing outward Connect two 36 shelf supports Ref C between the two assemblies one on each side as shown Be sure to use the ...

Page 3: ...pposite end of the unit Then attach the two ends by placing two 36 shelf supports across the width of the unit Be sure to mount as previously described 10 Continue placing shelf levels one level halfway between the center shelf and the top and one level using the top two keyhole slots Make sure all shelf supports are mounted with flat side facing up 7 Mount another upright post Ref A to the top of...

Page 4: ...de of this assembly sheet B Instead of stacking the uprights on top of each other as shown in step seven inside this sheet place four shelf supports in the top two keyhole slots being sure that the flat edge of each shelf support is facing up as described in earlier steps C Now build the second unit in the same manner as you did the first unit except this one with only two levels Place the top lev...

Reviews: