3
3
CH1
PROFESSIONAL STEREO AMPLIFIER
TOURING SERIES
1.5
0
10
I
O
On Mute Sign Lim Temp
CH2
0
10
On Mute Sign Lim Temp
P Series
SERIES
(Aux section of the Mixer)
Application Guidelines
a). Carefully Monitored Application:
For carefully monitored applications, where the peak transient capability must be
maintained, the amplifier should be capable of delivering twice the continuous power rating of the speaker. As an
example, a speaker rated at 600 continuous watts can be safely driven by an amplifier capable of 1200 watts power
output.
b). Routine application:
For routine application where high continuous, but non-distorted output is likely to encountered,
the amplifier power rating should match the continuous power rating of the speaker.
To protect your system
a) Use adequate clean power to drive the system to required levels. Avoid clipping or overload your power amplifier.
b) Recognize and respect the known limits of your equipment.
c) Consider adding a peak limiter, such as the compressor/limiter to your system to electronically limit potentially damping.
d) To get the best performance from a loudspeaker, the amplifier should be rated higher in terms of watts. It wouldn't be
unreasonable to connect a 200 W amplifier to a 100 W speaker, and it won't blow the drive units unless you push the
level too high.
6. Hook Up Diagram
Products Used:
• Studiomaster Professional XVP 1540M x 2 Passive Floor Monitor Speakers.
• Studiomaster Professional PA 1.5 Power Amplifier.
• Mixer of your choice.
• Connect the output from the Aux send in to the input of the amplifier to be used for the XVP1540M.
• Set the Master Aux level as required.
• Control the Aux send level from the Individual channels as required.
Usage:
