2
SM 600XLR
High quality microphone specially designed with three special operational modes for perfect speech and
vocal reproduction.
Safety Information
• Protect the microphone from moisture, liquids, fire and sudden impacts. Exposing it to such elements
could damage the microphone.
• Do not blow into the microphone to test/check the same. It is advisable to carry out a speech trial.
• When using wired microphones always ensure that the microphone cable is laid so that it does not
present a hazard.
Features
• 3 operational modes for quick sound variation.
1) Low Cut: Use this mode for a quick Low roll-off. This
mode reduces unwanted low frequencies & enhances mids.
2) Flat: This mode simply bypasses all kind of attenuation.
Use this mode for a fuller more natural tone.
3) -7dB: This mode reduces the sensitivity of the microphone. Use this mode to reduce
‘Proximity Effect’ & unpleasant ‘Pops’.
• Extra wide frequency response (30Hz~16KHz) designed to suit every
professional vocal applications.
• Dynamic super- cardioid pickup pattern minimizes off-axis pick-up, reduced
feedback and higher system gain.
• Suspended cartridge shock-mount system, to minimize handling noise.
• Low-failure magnetic on-off switch.
• Rugged body and dent-proof steel grill that withstands, physical shocks.
• Comes with a 6.5M flexible XLR-Jack cable, leatherette bag, mic holder & plastic case.
Connection
The SM600XLR is supplied with a 3-pin XLR Plug to connect to any microphone input (on a professional
mixer, amplifier, processor etc).
Maintenance
For cleaning the microphone body and basket use a soft, damp cloth. If necessary use a mild cleansing
agent. No solvent agents should be used. Take care not to allow any water into the microphone.
Service
In the unlikely event of equipment failure, kindly contact your Studiomaster Professional Dealer/Distributor.
-7 db
1
2
3
(Selectivity switch for the
3
operational modes)
