8
No Power On Led.....
Check A.C. power cord/mains lead is connected to wall
supply and switched on
Check A.C. power cord/mains lead is fully pushed into the
PAX+ side panel socket
Check the PAX+ is switched on
Check the A.C. fuse (on the side panel, inside the power
inlet connector). Always replace with the same type and
rating
UK only - Check fuse in mains plug
No sound.....
Check the signal source (from mixer, CD player etc) is
working
Check the VOLUME control is not in the minimum
(anti-clockwise) position
For the PX passive monitor, check that a suitable jack to
jack speaker lead is connected to the PAX+ powered
monitor
Distorted sound.....
Excessive volume will result in the amplifier overloading
and distorting. Reduce the volume.
The signal source is too high. Reduce at the mixing
console or other sound source.
Extreme tone control settings can overload the amplifier.
Reduce control setting by turning them toward the centre
(12 o’clock) position.
WHY IS IT NOT WORKING!
TROUBLE SHOOTING
www.studiomaster.com
www.studiomaster.com
PX+
PASSIVE MONITOR
PA X+
POWERED MONITOR