1. Features
2
• High Quality Single UHF Wireless Microphone System.
• Upto 200 Selectable UHF Channels.
• Easy Setup with Infrared (IR).
• Balanced XLR and Unbalanced ¼” Output with Level Control.
• Display for AF Level, RF Level, Channel and Frequency Indication.
2. System Options
Models:
• XR - 60 H (Handheld).
• XR - 60 L (Lapel).
3. Operating Instructions
3.1 Receiver Features: Front & Rear Panel
Rear Panel
Front Panel
1.
Antenna:
The antenna receives signals from the transmitter. For better signal strength, keep the antenna fully extended.
2.
Balanced XLR Audio Output:
This 3 Pin XLR male connector is provided to connect to the input of the mixer/
amplifier/powered speaker.
3.
Unbalanced Audio Output:
This ¼” (6.35mm) unbalanced jack is provided to connect to the input of the mixer/
amplifier/powered speaker.
4.
Power Jack:
Connect the supplied 12V DC adaptor to power up the unit.
1.
Power ON/OFF Switch:
To switch the receiver ON/OFF.
2.
Volume Control:
To adjust the signal volume level.
3.
IR Sensor
:
IR sensor to sync with the transmitter.
4.
▼
Down Key:
To toggle the channel downwards.
5.
▲
Up Key:
To toggle the channel upwards.
6.
Set:
Used to “Set” the selected channel.
7.
Display:
Display to indicate the channel frequency / channel number, transmitter reception (RF) and audio level
indication (AF). During power on the display will indicate channel frequency and when we switch the Up & Down key
for changing/switching to another frequency, the display will show the Channel number as shown in above figure.
1
3
2
4
7
6
5
4
3
1
2
682.000
MHz
RF
AF
5
10
15
20
25
30
35
40
-30
-25
-20
-15
-10
-5
0
Channel Number
Display
C H ––006
RF
AF
5
10
15
20
25
30
35
40
-30
-25
-20
-15
-10
-5
0
PEAK
7