Thank You for purchasing the Studiomaster Professional SEQ 302F, Dual 30-Band stereo graphic equalizer.
To ensure maximum performance and safety, please follow this instruction manual carefully.
Please retain this manual for future reference.
For any complaint, feedback or testimonials please contact our Distributor / Dealer.
3. Features
•
•
•
•
•
•
Balanced inputs and outputs with 1/4” TRS and XLR connectors.
Professional Dual 30-Band stereo graphic equalizer with Constant Q factor for live sound and install applications.
Feedback detection system with LED for each frequency instantly reveals the critical frequencies.
Durable & Accurate 20mm Faders for easy level setting of each frequency.
Range setting b12dB/-12dB to give the gradual variation required.
Low Frequency cut & EQ bypass switches.
2. Introduction
The Feedback Detection System is one of the most outstanding characteristics of our graphic equalizer. This ingenious circuitry
lets you immediately recognize & eliminate feedback frequencies. The Feedback Detection System uses the LEDs to indicate
the critical frequencies. This way, one can easily identify & control the particular frequency feedback.
1. Safety Instructions
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING:
To reduce the risk of fire or electrical shock, do not expose this appliance to rain or moisture.:
This symbol indicates that dangerous voltage constituting risk of electric shock is present within this unit.
This symbol indicates that there are important operating and maintenance instructions in the literature
accompanying this unit.
CAUTION:
To reduce risk of electrical shock, do not remove the cover.
There are no serviceable parts inside the device. Maintenance &
service operations are only to be carried out by authorized dealers.
•
•
•
•
•
•
• Make sure the power cord should be routed so that they do not get pinched & get subject to wear or tear.
• Always use a dry cloth to clean the product.
• Do Not drop the product, as it may cause the product to mal-function.
If the device has been exposed to extreme temperature fluctuation (e.g. after transportation), do not switch it on
immediately. The arising condensation might damage your device. Leave the device switched off until it has reached
room temperature.
The voltage and frequency must be the same as stated on the device. Wrong voltages or power outlets can lead to
damage of the device & fatal electrical shock.
Always plug in the power plug last. Make sure that the plug is connected properly to the outlet.
All operation & user instruction should be followed.
The product should be kept away from water & moisture.
Make sure the product is always well ventilated keep it away from extreme heat or cold.
Factory Repair Service maybe required in the following circumstances:
•
The Power supply cord or the plug has been damaged.
•
If the product has been exposed to liquid spillage, rain or heavy moisture.
•
If the product exhibits a change in performance & doesn’t operate properly.
•
If the product is damaged due to it being dropped.
1
