lean bottom panel (B) against a wall as shown.
insert the threaded bolt on one foot (F) into one hole on bottom panel (B). from the
opposite side, place one flat washer (M) and one locking washer (L) on top of threaded bolt
as shown. then, use a philips head screwdriver and mattress suport bolt (K) to secure into
place. repeat on remaining feet. once all feet are securely attached, set the assembled crib
base aside.
2
1
duc insider tip!
be sure the edges of the
feet are square to the
edges of the bottom
panel before fully
tightening the bolts.
important!
be sure the feet are
attached to the side of
the bottom panel
WITHOUT the
connector holes.
still confused? scan this code to watch the assembly video!
