5
Step Five
Once dowels are in place and boards sit tight to the leg,
use metal corners (9) and M6 screws (11) to fix the
middle section to the leg. Repeat procedure with right
Module. Note! Turn the metal corner’s shorter edge downward
Step Six
7
Step Seven
8
10
Connect two modules with middle parts one
by one shown on the illustration. Desk will stand
freely on dowels.
Push the modules closer
until the dowels seat properly in their respective
holes in legs and and desk surfaces are tight to each
other.
6
Screw the desk tips to the legs on both left and right module.
Decide on which position you are going to have your video monitor
shelf. There is 4 positions to chose from. Install strengthening bar to
the bottom of the video monitor shelf using M6 Screws and washers.
8
Step Eight
9
Step Nine
Fix middle section to the legs using metal corners (9)
and M6 screws (11)
Note! Turn the metal corner’s shorter edge downward
10
Step Ten
Fix rack rails (14) to the legs using
M6 screws (12). Positions for the
screws are predefined.
Please read appendix manual in this step.
Turn modules on it’s standing position
and position them on proximity of the length
of the main desk surface.
