Step Twenty four
24
Screw vertical board to the keyboard
Desk board using Confirmat screws.
Leave middle screws unscrewed.
Step Twenty five
25
Install adjustable brackets to the
sides as shown on the right on the both sides.
Measure your keyboard height before fixing It to the desk.
Fix all brackets on the same level according to your needs.
IMPORTANT! Use Hexagon M6 Screws here
Step Twenty six
26
Please use help of another two pair of hands here.
While to people fastening pull out to the desk using M6 screws,
third person helping to hold it into the position.
First, fasten screw (1) on the back and screw on the front (2) on both
sides. This will allow you to fasten rest of the screws in place while pull out
hangs on screws.
Last step is to fasten the left out confirmat screw (3) from step Nine
trough the hole on the Limiter belt.
1
2
3
Congratulations, your brand new desk is ready!