Studio Technologies 80 M80-00273 User Manual Download Page 3

Page: 3 / 17

Model 80 User Guide

Issue 4, March 1997

Studio Technologies, Inc.

Page 5

Foreword

I am pleased to present the Model 80 Stereo Analog Audio Distribution Amplifier. As both

president and owner of Studio Technologies, I take a very personal approach when de-

signing products. Getting older (38 as of this writing) has increased my appreciation of the

more subtle things in lifebe they a part of nature or the nuances contained in a well-

designed piece of electronic equipment. Do the technical and operational aspects of a

product work together to feel right? A Studio Technologies design is ready to go only

when I am completely satisfied.
Many fine people worked toward making the Model 80 happen. Mitch Budniak (ace

consulting engineer) designed many of the circuits. Jim Cunningham contributed to the

analog design. Carrie Loving provided engineering support. Barbara Govednik coordi-

nated the marketing communications aspects. Ben Kamen designed the automatic testing

routines. Al Lux designed the printed circuit board. Jim McGuire designed the graphics.

Fred Roeck performed the mechanical design. Joe Urbanczyk coordinated the safety

testing and agency approvals.
Additional thanks to Timothy Powell of Metro Mobile Recording, Glenview, Illinois, who

provided his excellent ears when issues of sonic quality arose. His extensive field and

studio experience was extremely helpful in keeping me on the audio straight and narrow.
Please contact me with your questions, comments, and suggestions. I can be reached by

voice at (847) 676-9177, fax at (847) 982-0747, or via the Internet @ www.studio-tech.com.

Sincerely,
Gordon K. Kapes

President

Summary of Contents for 80 M80-00273


















Search results

Summary of Contents for 80 M80-00273

Reviews:

Related manuals for 80 M80-00273

Brands by name

Popular brands

Studio Technologies 80 M80-00273, User Manual

Search results

Summary of Contents for 80 M80-00273

Reviews:

Related manuals for 80 M80-00273

Brands by name

Popular brands