Issue 1, April 2019
Model 372A User Guide
Page 20
Studio Technologies, Inc.
MODEL 372A
INTERCOM BELTPACK
The STcontroller software application can
also be used to identify Ultimo’s firmware
version. (Use the
Version
selection under
the
Device
tab.) The Ultimo firmware can
be updated by way of the Model 372A’s
Ethernet connection. The latest Ultimo firm-
ware file is available on the Studio Technolo-
gies’ website. The Dante Firmware Update
Manager (FUM) application program has
traditionally been used to install the Ultimo
firmware. The Dante Controller software ap-
plication also includes an automated method
of updating Ultimo firmware. Both applica-
tions are available, free of charge, on the
Audinate website (www.audiante.com).
Restoring Factory Defaults
A command in the STcontroller software ap-
plication allows the Model 372A’s configura-
tion to be reset to the factory default values.
From STcontroller select the Model 372A for
which you want to restore its defaults. Select
the
Device
tab and then select the
Factory
Defaults
feature. Then click on the
OK
box.
Refer to Appendix A for a list of the Model
372A’s factory default values.
Summary of Contents for 372A
Page 2: ...This page intentionally left blank...
Page 23: ......
