Studio 54 DAIQUIRI ECO, Instructions For Use Manual

Page: 13 / 32

13
13. Switching on and turning off
To turn on the refrigerator, hold the button 3 for 5 seconds: once the display is on, it will indicate the
temperature inside the refrigerating room. After some minutes, the refrigerating cycle will start. During
this operative cycle, the snowflake led (11) and the fan led (10) will light up on the display.
To turn off the refrigerated cabinet just hold the stand by button (3) for 5 seconds.
13.1 Setpoint setting
How to set up the Setpoint. To display the Setpoint value press the button (5): in this way the default
value will appear. To modify the Setpoint value, use the buttons 4 and 5 within 15 seconds after
pressing the button 5. To confirm the change, press the button 8.The Setpoint is the temperature
value that the product must reach, with a tolerance of 2°C higher.
13.2 Manual defrosting
To activate the manual defrosting, hold the button 2 for 5 seconds.
All the LEDs will turn off, except for the LED number 10: the defrosting cycle will start.
TROUBLESHOOTING
LABEL TROUBLE CAUSE RESULT SOLUTION
PR1
Probe 1 broken
(refrigerating
room)
• reading of
values outside of
the operating
range
• broken /short-
circuit /open
probe
•Label E1 display
•Steady Alarm led
•Check probe
type(NTC)
•Check probes wiring
• Replace the probe
PR2
Probe 2 broken
(defrosting)
• reading of
values outside of
the operating
range
• broken /short-
circuit/open probe
•Label E2 display
•Steady Alarm led
•Time-out of the
defrosting cycle.
•Check probe type
(NTC)
•Check probes wiring
•Replace the probe
AH
HIGH
temperature
alarm probe 1
Temperature of
the refrigerated
cabinet: too high
•No effects on
regulation
Waiting for the
temperature of the
probe 1 to drop.