Studer Vista 5 M3 Operating Instructions Manual Download

Page: 447 / 564

Vista 5 M3 Digital Mixing System

AutoTouchPlus 5-151

Document generated: 28.08.13

SW V4.9

5.22.2 Control Mode Options

Channel Auto-Mode Button

Order

>: This list selects which

Control Modes

will be selected by pressing

the

ISO (AUTO MODE)

key, and in what order. All four

Control Modes

may

be selected or not in whatever order is desired.

Affects

>: This set of radio buttons determines which controls within the

channel will be affected by the

ISO (AUTO MODE)

key when it is used to set

Control Modes

• <

Preselector Objects

>: The state of the

Control Modes

preselectors

determine which controls will be affected by the

ISO (AUTO MODE)

key

when it is used to set

Control Modes

• <

Fader

>: The

ISO (AUTO MODE)

key only affects the fader of the channel.

• <

Mute

>: The

ISO (AUTO MODE)

key only affects the mute of the channel.

• <

Fader & Mute

>: The

ISO (AUTO MODE)

key only affects the fader and

mute of the channel.

When Mix Status is Set to ON

This set of radio buttons controls what happens when

Mix On

is turned on

and off…

• <

Maintain Object Modes

>: In this case, turning

Mix

on or off, will not

change the control modes of any of the controls in the console.

• <

Set All to READ

>: In this case, turning

Mix

on after having turned it off,

will set all controls to

Read

• <

Set Pre-Selector Objects to WRITE

>: Any selected controls in the

ACU

CONTROL MODES

preselector will be set to

Write

. All others

are set to READ.

• <

Set Pre-Selector Objects to TRIM

>: Any selected controls in the ACU

CONTROL MODES

preselector will be set to

Trim

. All others are set to

Read

Summary of Contents for Vista 5 M3





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands

Studer Vista 5 M3, Operating Instructions Manual

Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands