Studer Vista 5 M3 Operating Instructions Manual Download

Page: 181 / 564

Vista 5 M3 Digital Mixing System

GC Operation 4-37

Document generated: 28.08.13

SW V4.9

4.4.3.7

Setup & Activate the Dynamics Sidechain Link

The effect of a Dynamics Sidechain Link, if activated, is identical to any item

of outboard gear set to Link or Stereo mode. This function is used to control

between two and eight Dynamics Processors inserted into up to eight different

channels. Regard less of which channel is carrying the highest signal level, all

processors will the provide the

same

gain modification. In this way, Stereo

or Multi-channel Surround image stability will be preserved. Unlike in many

analog consoles with dynamics units, the channels to be linked do not need

to have adjacent locations.

Note:

The number of Sidechain Links available (if any) is determined by the cur-

rently loaded configuration.

To activate the Sidechain Link for a selected channel, check the Enable

Sidechain Link box. This will activate linking of the Sidechain with another

channel, or with other channels assigned to that particular Link Group. The

channel must be assigned to a Link Group in order for the Enable Sidechain

Link box to function. The SCL (Sidechain Link) keys on the Vistonics will

follow the selections.

The status of the Sidechain Link is saved within snapshots and presets.

Summary of Contents for Vista 5 M3





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands

Studer Vista 5 M3, Operating Instructions Manual

Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands