Studer Vista 5 M3 Operating Instructions Manual Download

Page: 123 / 564

Vista 5 M3 Digital Mixing System

Parameters 3-35

Document generated: 28.08.13

SW V4.9

3.4.3

Panning

There are several panning options available. These range from a simple

mono-to-left/right pan over a stereo direction pan with width control to the

sophisticated family of

Virtual Surround Panning

(VSP) modules. Left/Right

and VSP functions are available for mono input, group, multi-track input, and

multi-track monitor channels. Direction and Direction with Width functions

are available for stereo input and group channels. In addition, there exist

upmix panning functions for easily inserting stereo sources into surround

mixes.

The panning functions can be controlled by the Vista’s motorized joystick. To

assign a channel to the joystick, press the joystick

FOLLOW

key (it will light)

and then the

LINK/SEL

key for the desired channel. The joystick can be used

to automate panning functions and then be reassigned to another channel by

pressing the

LINK/SEL

key of this channel.

Please note that there are

PAN

hardware keys above the Vistonics screens for

activating or deactivating the complete panning section, in addition to the

individual On/Off keys for the panning parameters.

If the

PAN

keys are de-activated, the channel signals are directly fed to all

assigned buses, without being influenced by any panning.

LR PAN for Mono Channels

The LR panning function is a simple PAN pot entio meter controlling the

contribution of the mono signal to the odd and even or left and right buses.

• PAN ON/OFF

• PAN function: Mono direction in 1° steps from –30° (L) to +30° (R).

–30°

Direction

+30°

Left

Right

Listening Position

Summary of Contents for Vista 5 M3





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands

Studer Vista 5 M3, Operating Instructions Manual

Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands