E-11
BLUETOOTH OPERATION
PAIRING A SMARTPHONE OR BLUETOOTH ENABLED DEVICE
The Bluetooth feature enables you to stream and play the digital music from your
Bluetooth enabled device to your unit.
1. In power on mode, tap the MODE button repeatedly to select Bluetooth mode, the
LED DISPLAY will show “bt”, the Bluetooth
indicator will flash.
2. The unit will start in auto connection mode and search for a previously paired device
that is active and in range (30 feet/10 meters). If found, a brief welcome melody will
be heard and Bluetooth indicator will change to solid on. If no active device is found,
the unit will switch to interactive pairing mode and the Bluetooth indicator keeps
flashing.
3. To establish a new link, turn on the Bluetooth function of your Bluetooth enabled
device and enable the search or scan feature to find “SB6085” in the list of
discoverable Bluetooth devices. Select the “SB6085” from your available device list
when it appears on its screen and a brief welcome melody will be heard if pairing
and connection is successful. If you are asked for a password, enter “0000”.
4. If no successful pairing and connection is made within 5 minutes, the unit may enter
manual pairing mode. You need to press and hold the PAIR button until Bluetooth
indicator flashes to initiate a pairing/connecting request to a new or old Bluetooth
enabled device. Follow step #3 to complete the process.
5. After successfully pairing and connecting your device with SB6085, the unit will emit
a brief welcome melody and the Bluetooth indicator will change to solid on. You can
now play music from your Bluetooth enabled device wirelessly to the SB6085.
6. If you want to connect the SB6085 to another new external Bluetooth enabled device
while paired with another device, press and hold the “PROG/PAIR” button for 3
seconds to disconnect the existing connection. The unit will emit two short beeps
and Bluetooth indicator will change to flash. Repeat steps #3 to #4 above to make a
new link.
7. Rotate the VOLUME CONTROL on the top panel to increase the listening volume
gradually until a comfortable listening level is reached.
8. Press the PLAY/PAUSE
button to control play/pause.
9. Press the SKIP FORWARD
button to skip to next song and SKIP BACKWARD
button to skip to previous song.
Notes:
If you cannot pair the unit with your Bluetooth enabled device, try solving the
problem by turning the unit power off, then power on, and then starting the pairing
process again.
The Bluetooth function of the unit will remain paired unless the paired device goes
out of range of 30 feet (10 meters). If the broken link is re-established within 30
seconds, the SB6085 will reconnect to the current paired device automatically.
Otherwise you will need to make a manual connection again later.
You may need to turn off the Bluetooth function of the paired external device first
before you make a new link.
Refer to manual of your smartphone or external Bluetooth enabled device for correct
Bluetooth operation instructions since it may vary from model to model.
If your Bluetooth enabled device does not support A2DP, it will not play the music
through the SB6085 system even after it is paired and connected successfully.
If you are pairing and connecting your personal computer to the SB6085 using
Bluetooth, you may need to set the SB6085 as your computer’s default sound
device.
Summary of Contents for SB6085
Page 1: ......
