Studebaker SB6077, Owner'S Manual

Page: 9 / 16

- 8 -
ANTI-SHOCK LOCK DOWN SCREW
The turntable on this unit features a built in Anti-Shock system. The turntable is locked down when
shipped from the factory. Turn the ANTI-SHOCK LOCK DOWN SCREW in a clockwise direction to
release the turntable and activate the anti-shock feature before operating the turntable.
ACTIVE SPEAKER OPERATION
1. Before turning ON the system, always remember to turn down the volume level using the
VOLUME CONTROL to avoid possible damage to the speakers due to sudden bursts of high
audio output.
2. Press the POWER ON/OFF BUTTON on the rear panel once to turn ON the Active Speaker
System, the POWER INDICATOR will light.
3. The VOLUME CONTROL is normally flush with the top panel of the RIGHT SPEAKER. Press it
once to eject and expose the VOLUME CONTROL KNOB. Rotate the VOLUME CONTROL
clockwise to increase the audio output level and counterclockwise to decrease the audio output
level. Press it again to hide.
4. As the Speaker System does not have a sleep mode, please turn it OFF manually after use by
pressing the POWER ON/OFF button to conserve electrical energy. The POWER INDICATOR will
turn OFF.
TURNTABLE UNIT OPERATION
1. Press STANDBY/FUNCTION BUTTON once to switch ON the Turntable unit.
2. Press the STANDBY/FUNCTION BUTTON again to select PHONO/
BLUETOOTH/USB function.
Corresponding indicator will light.
3. As the Turntable unit does not have a sleep mode, please turn it OFF manually after use by
pressing the POWER ON/OFF BUTTON to conserve electrical energy. All function indicators will
turn OFF.
PLAYING VINYL RECORDS
1. Check that the PHONO MODE SELECTOR at the rear panel of the Turntable unit is set to the
“PHONO OUT”, otherwise no sound can be heard.
2. Open the Dust Cover.
3. Remove the original plastic stylus protector from the STYLUS and release the Locking Clip of the
TONEARM HOLDER to free the TONEARM.
4. Choose "PHONO" function by pressing the FUNCTION BUTTON on the Turntable front panel.
5. Place a record on the PLATTER over the CENTER SPINDLE.
6. Set the SPEED SELECTOR to 33 or 45 rpm according to the record requirement.
7. Place the included 45 RPM ADAPTER over the CENTER SPINDLE when playing vintage 45
RPM records.
8. Raise the TONEARM using the CUE LEVER and move the TONEARM to the beginning of the
record or to the beginning of a particular track. Use the CUE LEVER to lower the TONEARM