13
AUX IN OPERATION
You can play other music sources (iPod, MP3 or other digital audio players) through the
speakers of the unit by connecting the AUX IN JACK to your external player’s audio out jack or
headphone jack.
1. Plug one end of an audio cable (not included) into the AUX IN JACK and the other end of
the cable to the headphone jack of your digital audio player.
2. Slide the FUNCTION SWITCH to the CD/USB/AUX IN position.
3. Turn on and start playing the external device you plugged into the AUX IN JACK.
4. Slowly adjust both the volume controls of your unit and the external device until you reach
a comfortable listening level.
5. Turn off both the external audio player and this unit after use. Unplug the audio cable from
AUX IN jack
Notes:
•
If you connect the unit to the Line-Out Jack of your external device, you only need to adjust
the VOLUME CONTROL of your unit. If you connect to the Headphone Jack of your external
device, you may need to adjust both the volume controls of your external device and the unit
to obtain the desirable listening level.
•
Remember to turn off the unit when you have finished listening. Don't forget to switch off the
power of your external audio device as well.
4. SB2140 will auto scan and pair with your Bluetooth receiver nearby, Pair indicator will
change to light Green steadily to indicate a connection has been established.
5. Play music on SB2140 in CD, USB, Tape or AUX mode, unit speaker sound will be off, you
can listen to music by using your Bluetooth receiver such as a headphone or speaker
wirelessly.
6. If you want change to pair with another Bluetooth Enabled Device, switch off the Bluetooth
function of your Bluetooth receiver which was paired previously. Press the BLUETOOTH
OUT button to turn off the function and press the BLUETOOTH OUT button again to pairing
mode (repeat step 2 to 5).
7. Press the BLUETOOTH OUT button when you finish listening in Bluetooth transmitter
mode, Green LED will be off and unit speaker will sound again.
Notes:
1.) When Bluetooth Receive/In or AM/FM Radio modes are in use, the Bluetooth
Transmit/Out function is disabled.
2.) There will be a brief sound delay when enabling the Bluetooth Transmit/Out function
3.) The VU meters will be inactive when headphones are plugged in or Bluetooth
Transmit/Out is enabled.
4.) Bluetooth Out (Transmitter) can only pair with Bluetooth receiver such as headphone or
speaker for music streaming wirelessly. Use your Bluetooth device volume control if
necessary.
USING HEADPHONES (NOT INCLUDED)
AUX IN OPERATION
Inserting the plug of your stereo headphones (not included) into the headphone jack located on
the top panel will enable you to listen in private. When using headphones, the speakers will be
disconnected.
Read this Important Information before Using Your Headphones
1.) Avoid extended play at very high volume as it may impair your hearing.
2.) If you experience ringing in your ears, reduce the volume or shut off the unit.
3.) Keep the volume at a reasonable level even if your headset is an open-air type designed to
allow you to hear outside sounds. Please note that excessively high volume may still block
outside sounds.
Summary of Contents for SB2140
Page 1: ......
