E-7
Recording from the built-in Radio
1. Select the FUNCTION SWITCH (#4) to RADIO position. The POWER indicator
will light.
A
2. Rotate the TUNING CONTROL (#12) to your desired radio station.
djust the TELESCOPIC ANTENNA to obtain best reception.
3. Load a blank cassette tape into the Cassette Compartment.
4. Press the PAUSE BUTTON (#6).
5. Press the RECORD BUTTON (#11).
6. Release the PAUSE BUTTON (#6) to begin recording.
7. To stop recording, press STOP/EJECT BUTTON (#7).
Recording from Microphone
1. Place the recorder within 2 or 3 feet of the sound source.
2. Slide the FUNCTION SWITCH (#4) to TAPE position.
3. Load a blank cassette tape into the Cassette Compartment. Press the PAUSE
BUTTON ((#6).
4. Press the RECORD BUTTON (#11).
5. Release the PAUSE BUTTON (#6) to begin recording.
6. To stop recording, press STOP/EJECT BUTTON (7).
Notes :
•
When the tape plays
to the end, recording will stop automatically.
•
T
•
The SB2127 is a mono player/recorder, so mono signal will be recorded through
the AUX JACK (#1) or Radio.
he recording level is automatically set and no volume adjustment is necessary.
CARE AND MAINTENANCE
•
Do not subject the unit to excessive force, shock, dust or extreme temperature.
•
Do not tamper the internal components of the unit.
•
Clean your unit with a dry cloth. Solvent or detergent should never be used.
•
Avoid leaving your unit in direct sunlight or in hot, humid or dusty places.
•
Keep your unit away from heating appliances and sources of electrical noise
such as fluorescent lamps or motors.
ABOUT CASSETTE TAPES
Whenever you record on a cassette any previously recorded material is erased as
the new material is recorded. To prevent you from accidentally erasing material
which you wish to save, blank cassettes are equipped with erase prevention tabs
for each side of the tape. If the erase prevention tab for side A is removed, you
cannot accidentally record on side A. The Record button cannot be depressed if
the erase prevention tab on the cassette has been removed.
To prevent accidental erasing on side A of a cassette use a small screw driver or
similar tool to break off the erase prevention tab for side A. This prevents the
record key form locking.
If later you do wish to record on side A of the cassette, cover the tab opening with
a piece of cellophane tape. This will allow the Record button to function again.
TAB FOR SIDE A.
BREAK OFF TO PREVENT RECORDING
COVER OPENING WITH TAPE
IN ORDER TO RECORD AGAIN.
Summary of Contents for SB2127
Page 1: ......
