Maintenance
6
Operation
6.1
Commissioning
Fitting correctly installed and connected
WARNING
Risk of injury and poisoning due to medium spraying out!
Use personal protective equipment when carrying out any
work on the
fi
tting.
After the
fi
rst loads due to pressure and operating temper-
ature, check that the
fi
tting is not leaking.
6.2
Manual operation
In the event of a power failure the
fi
tting can be operated
manually.
1
Fig. 5
Manual operation
Push the button (1) to open the valve.
The pneumatic valve will now be supplied with compressed
air.
7
Maintenance
WARNING
Risk of injury and poisoning due to hazardous media liq-
uids!
Use personal protective equipment when carrying out any
work on the
fi
tting.
7.1
Servicing
1. Visual and function check (every three months):
–
Normal operating conditions unchanged
–
No leaks
–
No unusual operating noises or vibrations
2. Clean the
fi
tting with a moist cloth if necessary.
7.2
Maintenance
DANGER
Risk of electrocution!
All electrical work must be carried out by quali
fi
ed electri-
cians only.
WARNING
Risk of injury and poisoning due to hazardous or hot
media!
Use personal protective equipment when carrying out any
work on the
fi
tting.
Safely collect the media and dispose of it in accordance
with environmental regulations.
WARNING
Risk of injury during disassembly!
Wear protective gloves, components can be very sharp-
edged due to wear or damage.
Remove components with springs (e.g. pneumatic drive)
carefully, since spring tension can cause components to
be ejected.
8
type 6014
BA-2017.10.18 EN
301 302
