- 12 -
Supersub Range
1)
Disconnect electrical supply before working on pump.
2)
Release system pressure from pipework and remove pump from water (do not use
cable to lift pump).
3)
Clean integral primary and secondary inlet filter grilles using water pressure from a
hose pipe (Fig. 11).
4)
Refer to commissioning section for instructions on re-starting pump.
Supervort Range
1)
Disconnect electrical supply before working on pump.
2)
Release system pressure from pipework and remove pump from water (do not use
cable to lift pump).
3)
Clean footstool using water pressure from a hose pipe (Fig. 12).
4)
Refer to commissioning section for instructions on re-starting pump.
Fig. 11
Primary Inlet Filter Grille
Secondary Inlet
Filter Grille
Footstool
Fig. 12
