Stuart Turner Monsoon Extra S1.4 bar, Installation, Operation & Maintenance Instructions Manual, Page: 13 / 16

- 13 -
Cont ...
7 TECHNICAL SPECIFICATION
Stuart Turner reserve the right to amend the specification in line with its policy of
continuous development of its products.
*Note: The maximum pressure that can be applied to the pump under any
installation conditions.
**Note: A stored water temperature of 60°C is considered sufficient to meet all
normal requirements and will minimize deposition of scale in hard water
areas.
7.11 Noise: The equivalent continuous A-weighted sound pressure level at a
distance of 1 metre from the pump does not exceed 70 dB(A).
Pump Model
S1.4 bar Single
46387
General Guarantee 3 years
WRAS approval 0304065
Features Pump type Centrifugal
Mechanical seal Nitrile/Carbon/Silicon Carbide
Anti-vibration feet

Inlet strainer(s)

Flexible hoses 2
Dry run protection

Performance Maximum head (closed valve) 1.4 bar
Performance @ 45 l/min 1.2 bar
Performance @ 90 l/min 0.7 bar
Maximum flow 120 l/min
Maximum static inlet pressure 10 metres
Maximum working pressure* 500 kPa (5 bar)
Maximum ambient air temperature 40 o C
Min / Max water temperature** Min 4
o
C / Max 65
o
C
Flow switch sensitivity (approx) 1.0 l/min
Connections Pump connections G 1 male
Flexible hoses Connections G 1 male x G1 female x 300 mm long
Motor Type Induction type, thermally protected
Duty rating Continuous S1
Electrical Power supply / phase / frequency 230 V a.c. / 1 / 50 Hz
Current (full load) 2.0 Amps
Power consumption 445 Watts
Fuse rating 5 Amps
Power lead (pre-wired) 1.5 metres
Physical Enclosure protection IPX4
Length 273 mm
Width 133 mm
Height (excluding hoses) 264 mm
Weight (including fittings) 7.7 Kg