NR-2000 User Manual
20
NR-2000 SEARCHING TECHNIQUE
Carry out a target search under maximum (if possible) probing signal
output and highest receiver sensitivity. That will ensure the maximum
detection range. Acting transmitter output and receiver sensitivity level
are defined by existing interference environment right on spot of a
searching operation.
In general, the noise surroundings are formed by UHF external signals
and non-linear targets that could not be eliminated or removed from the
area.
Scan antenna module along the examined surface (fig. 15). Once the
tone signal becomes audible in the headphones, localize the response
signal based on the maximum audio level in headphones.
]
Fig.15 Antenna system
scanning diagram
Switch on NR-2000 detector
and check its operability
according to workability test
section (see p.19).
USEFUL HINT: For better
Operator convenience one
can adjust telescopic bar
length, as well as antenna
module position adjusting
its elevation and rotation
(see fig. 5 &5a).
