4
Never use the device during thunderstorms. Over voltage could destroy the device. Always disconnect
the device during thunderstorms.The Symbol determines the minimum distance from lighted objects.
The minimum distance between light output and the illuminated surface must be more then this value.
The device must only be installed on a non-flammable surface, In order to safeguard sufficient
ventilation, leave 50 cm of free space around the device.
The housing must never touch surrounding surfaces or objects. Make sure that the area below the
installation place is blocked when rigging, dragging or servicing the fixture. For overhead use (mounting
height>100cm), always fix the fixture with an appropriate safety-rope. Fix the safety-rope at the correct
fixation points only. The safety-rope must never be fixed at the transport handles. Only operate the
fixture after having check that the housing is firmly closed and all screw are tightly fastened. The
maximum ambient temperature Ta=45
0
C must never be exceeded. Operate the device only after having
become familiarized with its functions. Do not permit operation by persons not qualified for operating the
device. Most damages are the result of unprofessional operation. Please use the original packaging if
the device is to be transported. Please consider that unauthorized modifications on the device are
forbidden due to safety reasons! Never remove the serial barcode from the device as this would make
the guarantee void. If this device will be operated in any way different to the one described in this
manual, the product may suffer damages and the guarantee becomes void. Furthermore, any other
operation may lead to dangers like short-circuit, burns, electric shock, crash etc.
DESCRIPTION OF THE DEVICE
Features
> 12pcs 10w CREE Quadcolor LEDs with RGBW colors
> Compact lightweight Narrow beam angle
>
Positioning within 630° PAN and 200° TILT
>
Stepless RGBW color changing
>
Different dimmer speeds (step response) adjustable
>
Masterdimmer
>
8 internal programs can be called up via Control board
>
Color-macro-function for an easy selection of possible color-combinations
>
Strobe effect with 1-18 flashes per second
>
Random strobe effect
>
Exact positioning via 16 bit PAN/TILT movement resolution
>
Automatic position correction
>
DMX-controlled operation or stand-alone operation with Master/Slave function
>
Sound-control via built-in microphone
>
Control board with graphic LCD display for adjusting the DMX-starting address, PAN/TILT reverse,
program, reset, operating hours
>
Switch-mode power supply
>
Automatic power supply adaption between 100 and 240 Volts without power selector
>
DMX control via every standard DMX controller
INSTALLATION
Rigging
The installation of the projector has to be built and constructed in a way that it can hold 10 times the
