Operation and maintenance manual
Product code: DTP05 (Ex)
Product description: Corner Drum Depalletiser
BESPOKE HANDLING EQUIPMENT LTD
Technical Support Line: +44 (0)1736 851050
Maintenance
Any maintenance needs to be carried out by a competent individual. The unit is
designed to be low maintenance.
Schedule
Weekly
3
Monthly Annually
Brakes and Toggle
Test brakes and adjust if required
●
●
●
Check orange side-shift toggle grips cross beam
(DTP04 only)
●
●
Chassis and Superstructure
Inspect labels are legible and complete
●
●
●
Inspect all components for wear and damage
●
●
●
Inspect chassis for damage and visually inspect all
welds for cracks
●
●
If the unit is ATEX rated ensure that the earthing
chains are in contact with the floor and that the
wheels are clean, free from debris
●
●
●
Hydraulic Operations
Test hydraulic lift and lower function for correct
operation
●
●
●
Check hydraulic oil level via sight glass, top up if
below half sight glass
●
●
Inspect hydraulic seals for damage and leaks
●
●
Replace hydraulic oil (Shell Tellus 22 or equivalent)
●
Agreed Performance Level
Carry out a load test with rated load, or if necessary
with customer specified load
●
Cleaning
Steam jets, degreasing agents and high-pressure
cleaners should be employed with great caution to
avoid degreasing components
●
●
Hydraulics troubleshooting
Unit does not lift
Unit overloaded
Unit does not lift to full stroke
Pump is short of oil. Ensure rod is at bottom
of stroke and top-up/refill with hydraulic oil.
Shell Tellus 22 or equivalent, half sight glass.
Oil leaking from top of ram around
chromed rod
Replace ram seals
Oil leaking from tank filler point
Filler bung damaged or unit over filled with
oil
