manualshive.com logo in svg

Strymon StarLab Z120-STLB, User Manual

Share
Download
Strymon StarLab Z120-STLB User Manual Download Page 33

StarLab

 

- time-warped reverberator

pg 33

IN GATE

Voltage range:

 0-5V

Gates the input to the reverb when CV is high. Blue 

INPUT GAIN

 LED 

indicates audio input is gated and not sent to the reverb. Can be set to 
latching response by pressing and holding 

HIGH BAND

 button at power 

up. Set to momentary response by default.

FAVORITE

Voltage range:

 0-5V

Toggles between the physical knob/switch settings of the module and the 
selected Favorite preset setting on rising edge.

INFINITE

Voltage range:

 0-5V

Engages the infinite effect to hold the input signal going into the reverb. 
Rising edge trigger will toggle the state. Can be set to momentary 
response by pressing and holding 

REGEN

 button at power up. Set to 

latching response by default.

IN GATE (Karplus-Strong)

Voltage range:

 0-5V

Continuously excites or ‘bows’ the string in latching or momentary 
operation.

INTERVAL

Voltage range:

 +/-5V

Sets pitch interval for shimmer. Quantized to 1/2 steps over +/- 1 
octave range.

SHIMMER

Voltage range:

 +/-5V

Sets shimmer level. Knob position acts as an offset.

Summary of Contents for StarLab Z120-STLB






































Reviews:

No comments

Brands by name

Popular brands

Load more brands