El Capistan
- dTape Echo
pg 20
External Control
Expression Pedal Setup
Use a TRS expression pedal to control the knobs of El Capistan �
1
Configure the
EXP/MIDI
jack for Expression mode
� (See
for
configuration instructions�)
2
Connect an expression pedal to the
EXP/MIDI
jack of El Capistan
using a TRS cable�
RIGHT IN
LEFT OUT
RIGHT OUT
EXP
MIDI IN
USB
MIDI OUT
3
Press and hold both footswitches until both LEDs blink
GREEN
�
4
Rock the expression pedal to the HEEL position� Only the
TAP
LED will
blink
GREEN
�
5
Set the knob(s) you would like to control to the desired settings for
the HEEL position of the expression pedal� Only the
TAP
LED will turn
RED
�
6
Rock the expression pedal to the TOE position� Only the
ON
LED will
blink
GREEN
�
7
Set the knob(s) you would like to control to the desired settings for the
TOE position of the expression pedal� Only the
ON
LED will turn
RED
�
8
Press either footswitch to exit and store your expression pedal setup�
NOTE:
Your expression pedal assignment is saved per Favorite setting or
MIDI preset�
NOTE:
If El Capistan is set to respond to MIDI EXPRESSION and the EXP/
MIDI jack is set to MIDI mode, you can send MIDI CC# 100 with values 0
(heel) to 127 (toe) to perform the expression pedal setup�
