Stryker Unity Sleep-Eez 3500, Operation & Maintenance Manual

Page: 20 / 46

F Fo oo ottb bo oa arrd d rre ep plla acce em me en ntt
T To oo ollss rre eq qu uiirre ed d::
• #3 Phillips screwdriver
P Prro occe ed du urre e::
1. Pull the strap (A) on the front of the recliner to slide out the extension frame (B) (Figure 5).
2. Pull the strap up and out to raise the ottoman cushion (C) to its upright position.
3. Using a #3 Phillips screwdriver, reach through the extension frame to remove the four screws that secure the footboard
to the extension frame. Save the screws.
4. Remove the footboard.
5. Reverse steps to reinstall.
6. Verify proper operation before you return the product to service.
A Arrm m cca ap p rre ep plla acce em me en ntt
T To oo ollss rre eq qu uiirre ed d::
• Rubber hammer
• Large flat screwdriver
P Prro occe ed du urre e::
1. Using a rubber hammer, hit the back of the arm cap (A) toward the front of the recliner until it stops moving forward
(Figure 7).
N No otte e -- Use caution when you hit the arm cap to avoid the risk of damage to the fabric.
2. Position a large flat screwdriver between the arm cap and arm to pull up on the arm cap and loosen the arm cap from
the recliner. Remove and discard the arm cap.
3. Align the new arm cap bolts with the holes at the front of the arm slots.
4. Using a rubber hammer, hit the arm cap down until it is tight to the arm.
5. Using a rubber hammer, hit the arm cap toward the back of the recliner until it stops moving back.
N No otte e -- Use caution when you hit the arm cap to avoid the risk of damage to the fabric.
6. Verify proper operation before you return the product to service.
A
F Fiig gu urre e 7 7 –– A Arrm m cca ap p
EN 16 3505009001-A