manualshive.com logo in svg

Stryker Secure II, Quick Start Manual

Share
Download
Stryker Secure II Quick Start Manual Download Page 9

Ease of Use: Siderail Positions

To facilitate siderails down, press the yellow release button (do not press the yellow release button to 
raise).

Grasp the top of the rail, pull outward and swing it up to full height. When the siderail is raised it does 
not lock in the intermediate position.

To utilize the intermediate position, push in the yellow release handle and rotate the siderail until it 
locks in the intermediate position.

To fully lower the siderails, push the release handle again and rotate the siderail until it is completely 
lowered.

Be sure the siderail is locked securely into position. Siderails are not intended to keep patients from exiting the bed. They are designed to keep patients from inadvertently rolling off the bed. Proper restraint 
methods shoudl be utilized to ensure the patient remains in the bed. The siderails are not intended to be used as a push device.

Always refer to the package insert, product labeling and/or operations maintenance manuals before using any Stryker product.

8

Summary of Contents for Secure II






















Reviews:

No comments

Brands by name

Popular brands

Load more brands