Stryker Rugged EZ-PRO R4 6092, Operation & Maintenance Manual

Page: 22 / 116

Cot Operation
20
Guidelines for Operation
S Use the Cot only as described in this manual.
S Read and understand all labels and instructions on the cot before using the cot.
S Use a minimum of two operators to manipulate the cot. (If additional assistance is required, see page 31
for a reference chart).
S
Do not adjust, roll or load the cot without advising the patient. Stay with the patient and control the cot
at all times.
S Always use the restraint straps and keep the siderails up when a patient is on the cot.
S Use properly trained helpers when necessary to control the cot and patient.
Auxiliary Lock
The auxiliary lock keeps the base frame from inadvertently exiting the loading position. Unlock the auxiliary
lock when:
S going from the loading position to the folded position,
S going from the loading position to an intermediate height position,
S
loading the cot into the ambulance.
Procedure
1. Put the cot in the loading position (see page 15).
2. Move the auxiliary lock lever to the right to the unlocked position.
3. Lower, change height position or load the cot.
Figure 18 − Auxiliary Lock
NOTE
The auxiliary lock can be unlocked only when the cot is in the loading position.
The auxiliary lock will reset to the locked position once the foot end release handle is actuated.
WARNING
Practice folding, changing height position and loading the cot until operation of the auxiliary lock is fully under-
stood. Improper use can cause injury. Unlock the auxiliary lock only to fold, change height position or load
the cot.