Stryker Prime TC, Maintenance Manual

Page: 26 / 64

IIV V p po olle e cco om mp po on ne en nttss
A
B
C
D
E
F
G
H
J
Torque item G
to 25 ± 5 in-lb
Torque item A
to 13 ± 3 ft-lb
F Fiig gu urre e 1 14 4 –– IIV V p po olle e cco om mp po on ne en nttss
IIV V p po olle e rre em mo ovva all
T To oo ollss rre eq qu uiirre ed d::
• 3/16” hex wrench
• Small slotted screwdriver
P Prro occe ed du urre e::
1. Remove the seat back ( Seat back replacement (page 10)).
2. Using a 3/16” hex wrench, remove the socket head cap screw (G) from the center of the IV pole topper (F) ( IV pole
components
(page 22)). Save the screw.
3. Tap and push up on the IV pole topper (F) to remove the topper. Save the IV pole topper.
4. Using a small slotted screwdriver, remove the tube plug (H) from the bottom of the IV pole (E). Save the tube plug.
5. Using a 3/16” hex wrench, remove the two flat head cap screws (A) to remove the lower IV pole clamps (B) from the
chair frame. Save the screws and clamps.
EN 22 1460-009-002 Rev B.0