Stryker MV3 5900, Maintenance Manual, Page: 24 / 138

M Ma aiin ntte en na an ncce e m me en nu u
The maintenance menu provides access to the following settings:
• Language
• Set clock
• Actuator maintenance
• Scale maintenance
• Angle maintenance
• Width maintenance
• Patient station
• Maintenance log
• Clear maintenance log
• Test modes
• Battery maintenance
To access the maintenance menu:
1. On the footboard control panel, press E En ntte err to access the S Se ettttiin ng gss menu.
2. Highlight M Ma aiin ntte en na an ncce e and press E En ntte err.
3. Use the up and down arrow buttons to highlight each number.
4. Press E En ntte err to increase the number.
N No otte e -- The number will increase to 9 until it resets to 0.
5. The maintenance code is as follows: 2, 4, 6
6. Highlight P Prro occe ee ed d and press E En ntte err to access the maintenance menu.
L La an ng gu ua ag ge e
To change the display language:
1. Enter the
Maintenance menu
(page 20).
2. Highlight L La an ng gu ua ag ge e and press E En ntte err.
3. Highlight the desired language and press E En ntte err.
S Se ett ccllo occkk
To change the product clock:
1. Enter the
Maintenance menu
(page 20).
2. Highlight S Se ett ccllo occkk and press E En ntte err.
3. In the clock setting menu you will see the following options:
• Year
• Month
• Day
• Hour
• Minute
4. Use the up and down arrow buttons to highlight each option and press E En ntte err to set.
EN 20 5900-009-002 Rev A.0