3) Push the Active mode (button 3) to resume compressions.
4) If it takes more than 60 seconds to change the battery, the device will need to do
another self test, and you must go through the device positioning procedure once again.
Cleaning and disposing of single use parts
1) The suction cup should be disposed of after each use.
2) The LUCAS 2 device should not be immersed in water. The device, backboard and
straps can be cleaned by wiping down with a mild soap or disinfectant solution.
Start of Shift checks
1) A battery check can be performed by holding the MUTE button.
2) You should also check that all the parts, straps and spare battery are in the pack.
Author: G.Healy September 2015
Summary of Contents for LUCAS 2
Page 6: ......
