8
www.stryker.com
EN
6400-099-700 Rev-AA
Instructions (continued)
To Operate the Handpiece
NOTE:
See the instructions for use supplied with the appropriate
console for additional information about handpiece operation.
1. Install an accessory into the attachment.
NOTE:
See the instructions for use supplied with the attachment to
properly install an appropriate accessory.
2. Plug one end of the cord into the handpiece cord receptacle
and the other end of the cord into the appropriate console cord
receptacle.
3. Use the console to program the operational settings of the
handpiece as required.
NOTES:
• When using the console, the Forward and Reverse buttons on
the Universal Driver Screen do not function. Use the handpiece
triggers or a footswitch to select the handpiece direction.
• When using the console, the Oscillate button will initiate a
turn-based oscillate mode that defaults to a one-turn oscillation.
Use the console touchscreen to select more turns as required.
• Depress both triggers together to operate the handpiece in the
oscillate mode.
• Pressure on a trigger will also control the speed of the
handpiece.
4. Use either the handpiece triggers or a footswitch to operate the
handpiece.
NOTE:
Use the console touchscreen to assign different functions
(such as the oscillate mode) to the footswitch pedals as required.
To Remove an Attachment
1. Fully depress the release button.
2. Firmly grasp and pull the attachment from the attachment
connector.
Final Disassembly
1. Unplug the cord from the console and from the handpiece.
2. Remove attachment as described above.
