manualshive.com logo in svg

Stryker 6100 Rugged M1, Operation & Maintenance Manual

Share
Download
Stryker 6100 Rugged M1 Operation & Maintenance Manual Download Page 42

Preventative Maintenance

1–41

STEER LOCK DETENT FORCE ADJUSTMENT

Required Tools:

Flat Blade Screwdriver

5/32” Allen Wrench

1/4” Allen Wrench

Adjustment Procedure:

1.

Rotate the steer lock knob (item A) to the locked position (see page 1–20).  Ensure both casters are in
the locked position and the steer lock pin is free of debris.

2.

Using a 5/32” Allen wrench, verify item B is tight on both sides.  If it is not, tighten it securely.

3.

Using a 1/4” Allen wrench, remove the set screw (item C) on both sides.

4.

Using a flat blade screwdriver, rotate the detent (item D) on both sides counterclockwise until no detent
force is felt.

5.

Using a flat blade screwdriver rotate the detent (item D) clockwise, alternating from side to side, 1 turn
at a time, until resistance is felt against the detent plate (item E).

 CAUTION

Do not overtighten the detent.  Damage to the detent plate could occur.

6.

Using a flat blade screwdriver, rotate the detent (item D) counterclockwise 2 1/2–3 turns on each side.

7.

Verify the steer lock system is operating properly.  Additional adjustment may be required.  Rotate the
detent (item D) 1/2 turn clockwise for more detent force or 1/2 turn counterclockwise for less detent force.

8.

Using a 1/4” Allen wrench, install the set screw (item C) and tighten against the detent (item D) on both
sides.

Summary of Contents for 6100 Rugged M1















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands