manualshive.com logo in svg

Stryker 5050, Operation Manual, Page: 14 / 20

Share
Download
Stryker 5050 Operation Manual Download Page 14

13

Operation Guide

OPERATING THE ENHANCED CLEARANCE HEAD PIECE

To operate the enhanced clearance head piece, grasp either handle under the

head section and squeeze.  Handle (A) releases the latch and rotates the

head piece on axis ”A”.  Handle (B) releases the other latch and rotates

the head section on axis ”B”.  For ease of operation, it is recom-

mended that only one latch be released at a time.

WARNING

The weight of the patient’s head is resting on the head piece and must be supported by the operator when
the latches are released and the head piece is being positioned.  Failure to adequately support the head piece
while positioning the head could result in patient injury.

CAUTION

The dual articulating headpiece is designed to provide precision surgical positioning.  Be sure to treat it with
care.  The unit should be routinely checked to ensure optimal performance.  In the event of any impact or
overload of the headpiece, be sure the unit is working properly and supports the intended load.  Verify the
adjustment gears lock and release properly and, if necessary, refer to the adjustment procedure in the mainte-
nance manual.

USING THE OPTIONAL INFLATABLE HEAD SUPPORT CUSHION

The optional inflatable head support cushion has two internal air blad-
ders.  Squeeze the bulb (A) to inflate the bladders and provide more sta-
bility for the patient’s head.  Press the release valve (B) to deflate the
bladders.

AXIS

AXIS

(Cut-A way View)

A

B

Summary of Contents for 5050





















Reviews:

No comments