Stryker 3500-000-681, Operation & Maintenance Manual

Page: 23 / 64

S Se errvviicce e
C Ca asstte err rre ep plla acce em me en ntt
T To oo ollss rre eq qu uiirre ed d::
• #3 Phillips screwdriver
• Blanket or equivalent
P Prro occe ed du urre e::
1. Pull the bench away from the wall.
2. Lay a blanket, or equivalent, on the floor behind the bench.
3. Using two hands, lift up on the bottom of the bench to flip the bench onto its back.
C CA AU UT TIIO ON N -- Always confirm stable foot placement and back support or get assistance from another person to avoid the
risk of injury or product damage.
4. Using a #3 Phillips screwdriver, remove the four screws (A) that secure the caster to the sleeper pullout or the bench
frame (Figure 7). Save the screws.
5. Reverse steps to reinstall.
6. Verify proper operation before you return the product to service.
A
B
C
D
F
E
F Fiig gu urre e 7 7 –– B Be en ncch h a asssse em mb bllyy
F Fo oo ott rre ep plla acce em me en ntt
T To oo ollss rre eq qu uiirre ed d::
• Blanket or equivalent
P Prro occe ed du urre e::
1. Pull the bench away from the wall.
2. Lay a blanket, or equivalent, on the floor behind the bench.
3. Using two hands, lift up on the bottom of the bench to flip the bench onto its back.
3504009001-A 19 EN