3
Warnings and Cautions
Please read this manual and follow its instructions carefully� The words warning, caution,
and note carry special meanings and should be carefully reviewed:
•
Warning:
Indicates measures to avoid potential serious injury to the user and the
patient and/or damage to this device�
•
Caution:
Indicates risks to the equipment� Failure to follow cautions may result in
product damage�
•
Note:
Provides special information to clarify instructions or present additional useful
information�
•
An exclamation mark within a triangle is intended to alert the user to the
presence of important operating and maintenance instructions in the manual�
•
A lightning bolt within a triangle is intended to warn of the presence of
hazardous voltage� Refer all service to authorized personnel�
For all warnings and cautions related to the VisionPro SYNK 26" Wireless LED Display, refer to the
display user manual, P22286�
Warnings
To avoid potential serious injury to the user and the patient and/or damage to the system, please
note the following warnings:
•
Read the operating manual thoroughly and be familiar with its contents prior to using the
system�
•
Carefully unpack the system and check if any damage occurred during shipment�
•
Test this system prior to a surgical procedure� This system was fully tested at the factory
before shipment�
•
Do not place any heavy object on the power cord� Damage to the power cord can cause fire
or electric shock�
•
This system is not suitable for use in the presence of a flammable anesthetic mixture with air,
or with oxygen or nitrous oxide�
•
Do not put any liquid or solid object into the display panel, or the transmitter console� If this
occurs, unplug the device and have it checked by qualified personnel before operating it any
further�
•
Disconnect the transmitter from the electrical outlet when inspecting the fuses�
•
To avoid electric shock, do not open the display and transmitter housing�
•
Do not touch the device and a patient simultaneously, as there is a risk of electric shock�
•
Install this system in an operating room that complies with all applicable IEC, CEC, and
NEC requirements for safety of electrical devices� Any installation or connection with other
devices shall be evaluated for electrical safety according to the IEC 60601-1�
•
Do not modify this equipment without authorization of the manufacturer�
•
Attempt no internal repairs or adjustments not specifically detailed in this operating manual�
Refer any adjustments, modifications, and/or repairs to Stryker Endoscopy or its authorized
representatives�
•
Use appropriate caution to prevent contact with fluids if the display or transmitter is being
used with a power supply in patient environments�
