1.
To mount the Cooli System control unit, place the bolts
in the holes.
2.
Secure the bolts with the supplied nuts.
Connecting the cables to the control unit
1.
Connect the cables to the respective sockets on the
rear of the control unit.
Note
The sockets and cables are different from
each other so you cannot connect the
wrong cable to the wrong socket.
Note
Connect the 24 V/CAN to the machine with
which you are using the cooling unit.
The 24 V/CAN cable used is supplied with
the control unit.
5.3
The recirculation pump
•
Mount the recirculation pump on the connection for the pump.
Adapter ring
•
A small pump: use the adapter ring to decrease the diameter of the connection.
•
A large pump: remove the adapter ring to increase the diameter of the connection.
Magnetic filter
•
Mount the magnetic filter in the hole. See
Water level gauge
•
Mount the water level indicator in the hole. See
.
5.4
The filter tray
•
Place the filter tray in the tank.
20
Cooli System
5 Assembling the cooling unit