Struers Accutom-5, Instruction Manual

Page: 39 / 236

Accutom-5
Instruction Manual
35
Copying a method is a shortcut to creating a new cutting method on
the basis of an existing one.

Select the cutting method you want to copy from.
SELECT CUTTING METHOD
1. UNNAMED METHOD 2.EMPTY METHOD

3.EMPTY METHOD 4.EMPTY METHOD
5.EMPTY METHOD 6.EMPTY METHOD
7.EMPTY METHOD 8.EMPTY METHOD
9.EMPTY METHOD 10.EMPTY METHOD
11.EMPTY METHOD 12.EMPTY METHOD
F1:COPY F3:RESET F4:RENAME


Press ENTER

if you would like to see
the method parameters.

Esc

Press Esc to return to the above display.

F1

Press F1:COPY to copy the method to
the buffer.

COPY METHOD
Do you want to copy method
1. UNNAMED METHOD to buffer?
ENTER: YES ESC: NO


Press ENTER

to accept copying the
method to the buffer.
Copying a Method