background image

START-UP AND OPERATION  

Merchandiser Start-Up 

 

• 

Plug cord into a certified electrical outlet 
with ground. 

• 

Turn on the main power. Switch is on the 
rear right hand side of base.  Supply power 
will turn on the lights.  First time lighting 
may require a short warm up period for the 
bulbs. Slightly dim or a flickering of new 
bulbs is normal. 

 

Adjustable Shelves 
 

• 

Adjustment of the angle of the shelf can be 
made, not the position. 

• 

Adjustments to the shelves can be made 
by pivoting the lower portion of the shelf 
bracket in the upright. 

 

• 

The shelves can be adjusted to an angle 
of: 0, 5, and 10 degrees.

 

 
Caster locking operation 
 

• 

To lock casters push down on lever to 
unlock pull up the lever all the way. 

 

Raise the Curved Glass  

 

• 

To raise the curved glass, grab the lift han-
dle extrusion on the bottom edge of the 
front curved glass and lift up. 

• 

Gas cylinders hold the glass open for 
hands free access to the interior of the 
case. 

Note: 

When cases are next to a wedge, only 

one front curved glass may be lifted at a time. 

OFF

 

ON

 

Rocker Switch

 

Main Power Switch

 

Lift Handle 

 

 

Summary of Contents for Oasis Mobile Series














Reviews: