background image

Page  of 12 

2

 

 

Thank you very much for choosing a Strongway product! For future reference, please complete 

the owner’s record below: 

      Model: _______________     Purchase Date: _______________ 

Save the receipt, warranty and these instructions. It is important that you read the entire manual 

to become familiar with this product before you begin using it.   

 
This cart is designed for certain applications only. The distributor cannot be responsible for 
issues arising from modification. Do not modify this cart or use it

 

for any application other than 

that for which it was designed.   
 
For technical questions please call 

1-800-222-5381

 

INTENDED USE 

TECHNICAL SPECIFICATIONS   

Item Description 

Capacity 

Overall maximum 1,200 lbs. load capacity 
Maximum 500 lbs. dumping load capacity when cart 
is loaded. 

Tires 

13 inch Pneumatic Tires 
Do not inflate the tires to more than 30 PSI. 

Construction 

Poly bed with steel frame. 

Dimensions 

39.75 x 25.5 x 25.25 

 

GENERAL SAFETY RULES 

WARNING:

 Read and understand all instructions.

 Failure to follow all instructions listed 

below may result in serious injury. 

 

CAUTION:

 Do not allow persons to operate or assemble this heavy duty garden 

dump cart

 

until they have read this manual and have developed a thorough understanding of 

how the heavy duty garden dump cart works.

 

 

 

WARNING:

 The warnings, cautions, and instructions discussed in this instruction 

manual cannot cover all possible conditions or situations that could occur. 

It must be 

understood by the operator that common sense and caution are factors which cannot be built into 

this product, but must be supplied by the operator. 

 

 

SAVE THESE INSTRUCTIONS 

Summary of Contents for STR866D













Reviews: