Strongway 53916, Owner'S Manual, Page: 7 / 10

Page 7 of 10
STEP 6
Starting with lowest position, install the next set of SLIP
SLEEVES (E) on (4) TOP POLES (B). Place another SHELF (A)
over the poles and secure the SHELF (A) so the top of the SLIP
SLEEVES (E) are flush with the top of the corner cylinders on
the SHELF (A).
Repeat until all shelf positions on the TOP POLES (B) have a
SHELF (A).
The Feet Levelers are already screwed into the BASE (D) and
you can adjust as needed to ensure your shelving rack is level.
STEP 7
Place (9) BINS (H) onto each SHELF (A).
Before Each Use

Before using a new bin or reloading an existing bin, check for any damage. Carefully check that
the bins will safely hold the intended parts.

Replace damaged or worn parts immediately. Never load the storage rack when it has a damaged
part.
After Each Use

Store the storage rack when not in use. Store it in a secure place out of the reach of children.

Inspect the storage rack for good working condition before storage and again before the next use.