background image

Page 4 of 11 

 

Intended Use 

This Strongway Heavy-Duty Drywall Dolly Cart is made from welded 1inch steel tubing for durability. 
The stepped 14-gauge steel plate bed provides stability for 8 inch rubber casters (2 rigid and 2 swivel). 
Overall dimensions are 49 

5/8

 inches (L) x 22 

¾

 inches (W) x 46 ½ inches (H). Deck with cross braces 

attaches to upright frame to help keep load in place. 

Technical Specifications 

Property 

Specification 

Total Capacity (lbs.)

 

1,600

 

Support Arm (qty.)

 

Platform Size (in.)

 

47.48 (L) x 22.83 (W) x 46.26 (H)

 

Ship Weight (lbs.)

 

64

 

Important Safety Information 

WARNING

 

 

Read and understand all instructions. Failure to follow all instructions may result in serious injury 

or property damage. 

 

The warnings, cautions, and instructions in this manual cannot cover all possible conditions or 

situations that could occur. Exercise common sense and caution when using this cart. Always be 

aware of the environment and ensure that the cart is used in a safe and responsible manner.  

 

Do not allow persons to operate or assemble the product until they have read this manual and 

have developed a thorough understanding of how it works. 

 

Do not modify this cart in any way. Unauthorized modification may impair the function and/or 

safety and could affect the life of the cart. There are specific applications for which the product 

was designed.  

 

Use the right tool for the job. DO NOT attempt to force small equipment to do the work of larger 

industrial equipment. There are certain applications for which this equipment was designed. It will 

be safer and do a better job at the capacity for which it was intended. DO NOT use this equipment 

for a purpose for which it was not intended. 

 

Industrial or commercial applications must follow OSHA requirements. 

 

WARNING

 

This product may contain chemicals known to the State of California to cause cancer, birth defects or 
other reproductive harm. 

 

WARNING

 

WORK AREA SAFETY 

 

Inspect the work area before each use. Keep work area clean, dry, free of clutter, and well-lit. 

Cluttered, wet, or dark work areas can result in injury. Using the cart in confined work areas may put 

you dangerously close to cutting tools and rotating parts. 

Summary of Contents for 52880












Reviews: